How Much To Ship Alienbee B1600 For Repairs

The AlienBees™ B1600 is a powerful, self-contained studio wink unit with adjustable output from full power (640 Ws) down to 1/32nd of the full ability (20 Ws). This flashpower is adjusted on the back command console with a slide fader, capable of adjusting in whole f-stop increments and everywhere in between. When adjusted from a higher to a lower setting, the unit of measurement will automatically dump the excess power for accurate output.

With precision voltage regulated circuits supplying consistent output, the B1600 boasts true "what-you-encounter-is-what-y'all-get" modeling lamp accurateness. The modeling lamp tin be set to full brightness, turned completely off, or set to track the ability changes. Furthermore, the standard 150 Watt modeling lamp may be used every bit a recycle indicator, turning itself off when the unit is recycling, and coming back on to let yous know when the unit is fully recycled and you lot are gear up to shoot again. Ready for heavy-duty, all-day shooting, the AlienBees™ have built-in cooling fans to keep up with their fast recycle.

The B1600 arrives with a sync cord allowing you to connect your photographic camera to the unit to trigger the flash. The unit additionally has a built-in slave tripper to let wireless firing. The unit has standard 120 VAC (l-60 Hz) power requirements and arrives with our xv-foot power cord to connect to a standard, grounded outlet for power.

Both versatile and indestructible, the AlienBees™ units are housed in loftier-impact Lexan polycarbonate (the same material used for bullet-proof glass), keeping them lightweight and prepare to travel.

	AlienBees™ B400	AlienBees™ B800	AlienBees™ B1600
True Wattseconds	160 Ws	320 Ws	640 Ws
Lumenseconds	seven,000 Ls	14,000 Ls	28,000 Ls
Power Variability	6 f-stops (full to 1/32)	6 f-stops (full to i/32)	6 f-stops (full to ane/32)
Recycle to 100%	0.v seconds	ane second	2 seconds
Flash Duration (t.five)	i/6000 second (at full power) 1/3000 second (at 1/32 ability)	1/3300 second (at total power) ane/1650 second (at 1/32 power)	one/1800 second (at full ability) 1/900 second (at i/32 power)
Flash Duration (t.1)	ane/2000 second (at full power) i/yard second (at ane/32 ability)	1/1100 2nd (at full power) 1/550 2d (at 1/32 ability)	one/600 2nd (at full power) one/300 second (at 1/32 ability)
Power Requirements	120 VAC, 50-60 HZ	120 VAC, fifty-60 HZ	120 VAC, 50-lx HZ
Average Current Depict	6 amps average	six amps average	6 amps boilerplate
Sync / Trigger Voltage	less than 6 volts	less than 6 volts	less than 6 volts
Modeling Lamp	150 Watt supplied (150 Watt max.)	150 Watt supplied (150 Watt max.)	150 Watt supplied (150 Watt max.)
Flashtube	14mm single-band tube	14mm single-ring tube	14mm single-ring tube
Stand up Mount	fits stands upwardly to 5/viii"	fits stands up to 5/8"	fits stands upward to 5/8"
Umbrella Mount	fits poles up to 3/eight"	fits poles up to 3/8"	fits poles upward to 3/8"
Standard Reflector	7AB/R 7-inch silver reflector (80° beam spread)	7AB/R 7-inch silver reflector (80° beam spread)	7AB/R 7-inch silverish reflector (80° beam spread)
Weight	2.5 pounds	2.9 pounds	3.7 pounds
Dimensions	8.5" l x 7.875" h x five.75" w	8.5" l x seven.875" h x 5.75" w	8.v" l x seven.875" h x 5.75" west

Dimensions Note: length measurements taken from the front of the shipping comprehend (in identify on the unit'southward faceplate) to the back panel; acme measurements taken from the top of the umbrella screw to the bottom of the low-cal stand meridian coupler, folded back underneath the unit; width measurements taken from side to side at the widest points

See Expected Output

Connecting the flash unit to your camera: Each AlienBees™ flash unit arrives with the ABSC standard xv-foot sync cord for hardwired connection to your camera. The cord connects to the wink unit on the unit of measurement'south back command panel (1/8-inch sync plug), and then connects to your camera's PC-sync outlet. This outlet may exist labeled "PC sync," "PC terminal," "X-sync socket," "external flash connector," or "flash sync terminal" – the characterization varies by camera manufacturer. If your specific camera does not have a PC outlet, we offering a hot shoe adapter that fits in the standard ISO hot shoe of most cameras to enable PC-connexion. For additional flash/camera synchronization options, see the information below almost remote controls.

Lite Stands: Each AlienBees™ flash unit must be securely mounted to a low-cal represent use. The stand mount is compatible with all Paul C. Buff lite stands as well as most standard lite stands having top couplers up to v/8-inch.

Portable Power: For portable, battery ability we recommend the use of our Vagabond Portable Power Systems.

Remote Controls: The AlienBees™ units may exist used with our CyberSync™ arrangement (compatible with both the CST transmitter and the Cyber Commander™). As the AlienBees™ are generation one Paul C. Buff™ lights, they may be used with either the CSR, CSRB, CSR+ and/or CSRB+ receivers, but not the CSXCV transceiver. The units may additionally be used with the LG4X™ wired remote control as well equally older Paul C. Buff™ remotes incorporating the telephone string connexion (such as the retired RR1 RadioRemote One). The units are compatible with near other third political party triggering receivers (such equally the PocketWizard®). A one/8-inch to one/eight-inch non-attenuated mini male mono cord such as our CSSC is required to connect the receiver to the AlienBees™ unit of measurement.

PLM™ and Umbrellas: Each AlienBees™ unit has an umbrella shaft that runs forth the meridian length of the unit housing, plumbing equipment standard umbrella poles up to 3/8-inch in diameter. It may be used with the PLM™ organisation (both the current model and previous models) besides every bit retired Paul C. Buff™ umbrellas. The PLM™ system's on-axis speedring mount may be used as well.

Softboxes and Octaboxes: The faceplate on each AlienBees™ unit of measurement has four holding fingers that expand and contract to agree speedrings for softbox and octabox zipper. The unit may be used with whatsoever of our foldable softboxes, octaboxes or stripbox besides equally retired models of Paul C. Buff™ softboxes and octaboxes. When using softboxes past other manufacturers, you will demand to get a Paul C. Buff™ uniform speedring.

Reflectors: The four holding fingers on the faceplate as well expand and contract to concord various reflectors. Each AlienBees™ unit arrives with our 7AB/R 7-inch silver reflector for general use and is additionally uniform with our 8.5HOR 8.five-inch high-output silver reflector, the 11LTR 11-inch long-throw reflector, the 22HOBD and 22HOBD-Due west beauty dishes, the UBR background reflector and the 7UR reflector. The UMF LiteMod™ Unit Mainframe (and its associated accessories) may likewise be used. If yous wish to utilise honeycomb grids, the seven-inch grids (HG10, HG20, HG30, HG40 and the HG4X set) are compatible with the supplied 7-inch reflector.

Gels and Filters: Our standard gels and filters (CF6, CF20, WF6, UV6, DF6 and ND6) may all be used with AlienBees™ units, used with the LiteMod™ system or with the 7-inch reflector using clips.

Travel Gear: Ane AlienBees™ unit can be carried in our PCBBAG Paul C. Buff™ conveying bag (with the shipping encompass, reflector, cords and room for other small accessories). For consideration of travel cases from other manufacturers, the AlienBees™ dimensions are 8.5" length (including the shipping cover) x 7.875" height (from the peak of the umbrella spiral to the bottom of the light stand up top coupler, folded back underneath the unit) x 5.75" width.

Replacing AlienBees™ Components: For time to come replacement needs, the flashtube used in each AlienBees™ unit is the AWFT14MMUV flashtube. This is a user-replaceable tube arriving with instructions for replacement. The modeling lamp used in the unit is the 150W modeling lamp, too user-replaceable. While other flashtubes may not be substituted, other wattage modeling lamps may be used with the AlienBees™ if a lower wattage seedling is desired. The seedling must have a standard, medium Edison-type base and may not exceed 150 watts.